Educators Workshops

WORKSHOPS UNLOADING:  

 

  • Use the DESIGNATED TURNING LANE (see photos below) in front of the Mills Center for short term parking to load/unload only. Look for the white stripe painted on the road with right turning lane arrow but DO NOT TURN DOWN INTO THE LOADING DOCKS for any reason! That area is strictly for the hundreds of Craftsmen's Fair vendors trucks & inside is a confusing labyrinth of winding corridors & elevators (no 4-wheel dollies there either).

 

  • NEW for 2026: The GCC is allowing us to unload/load along the curb inside the semi-circle Trolley turnaround as they will have the Trolley pick up at the street. Do not park in the designated, lined parking spaces inside the Trolley turnaround since these are reserved for show personnel with parking tags, including the Craftsmen’s Fair staff who will report you to security to be towed.

 

  • If the unloading/loading zone is full, just drive up the street & cruise by again to check for openings. There is nowhere else to park except the paid parking lots nearby unless you’re staying at the Gillette Motel across the street.

 

  • Inside the Mills Center are 10 four-wheel dollies to take turns using. Quickly unload, then return the dollies to the lobby where you found it & move your vehicle to paid parking lots across the street so the next company can do the same. Please save the pleasantries of visiting with friends/associates until your vehicle is out of the unloading/loading area so everyone can move-in quickly. 

__________

EDUCATORS with WORKSHOPS (Fri/Sat/Mon):

.

Classrooms #3, 4, 7, 8 & 11:

  • At some point these 5 rooms will no longer have the complimentary pull down screens once the flat screen tv’s are installed for paid usage (ETA unknown & TBD by the GCC). Please bring your own screen or rent one on my Square store.

 

Classrooms #1, 2 & 10:

  • These 3 rooms DO NOT have pull down screens. You are welcome to bring your own A/V & screen at no extra charge or rent them from my secure Square store.

 

  • All classrooms are set up max classroom style & comfortably fit 24 students max 3 per table for hands-on class with nail supplies spread out (4 per table for seminars only where no table top nail nail products setup is required).

 

  • You must provide your own extension cords & plastic table covers.

 

  • We will be on site at 8:00am (EST) for you to set up your classrooms. See "Nail Classes/Workshops" page to know your assigned classroom number.

 

  • ALL lunch breaks are from Noon - 1:00pm to prevent Workshops from overlapping. The only hot & cold concessions will be downstairs in the Craftsmen's Fair (see above "Catering & Concessions" for entrance fee & details). The GCC does not allow food delivery nor any outside food to be brought in.

__________

FRIDAY WORKSHOPS: 

 

  • Booth setup is only allowed on SATURDAY since we DO NOT have the Mills Center show floors reserved on Fri. & Mon. Those exterior GCC doors will be locked until we arrive on-site at 8:00am. Please follow the unloading instructions below.

 

  • The Mills Center doors will be locked again after all Educators holding Friday Workshops are on site to prevent random people from wandering around inside the GCC.

 

  • Let your students know to enter the GCC no earlier than 8:45am via the locked doors into the Craftsmen's Fair entrance at the Airport Rd doors located to the right of the Mills Center (look for our big Workshop banner hanging on the railing with an arrow pointing up the ramp; see photo below) otherwise those Airport Rd doors will remain locked until the Craftsmen's Fair opens at 10:00am. 

 

  • If you're also holding a Saturday Workshop in your same classroom, please let us know when you're finished on Friday so we can lock your classroom door to securely store your supplies overnight.

 

  • We must all be walking out of the GCC by 5:00pm per our contract, so pack away items as you're finished using them in order to meet this firm end time. Abuse of this end time WILL result in a $250 advance deposit for any future classroom reservations. This deposit will only be refunded if the Educator vacates the classroom before 5:00pm, otherwise it is forfeited without recourse.

__________

SATURDAY WORKSHOPS:

  • We've made arrangements with the Craftsmen's Fair security guards & the GCC to let Educators enter at 8:00am via the locked doors into the Craftsmen's Fair entrance at the Airport Rd doors located to the right of the Mills Center (look for our big Workshop banner hanging on the railing with an arrow pointing up the ramp next to the concrete steps; see photo below).

 

  • Let your students know to enter the GCC no earlier than 8:45am at that same entrance, otherwise those doors will remain locked until the Craftsmen's Fair opens at 10:00am. 

 

  • We must all be walking out of the GCC by 5:00pm per our contract, so pack away items as you're finished using them in order to meet this firm end time. Abuse of this end time WILL result in a $250 advance deposit for any future classroom reservations. This deposit will only be refunded if the Educator vacates the classroom before 5:00pm, otherwise it is forfeited without recourse.

__________

MONDAY WORKSHOPS ONLY:

 

  • You may set up your classroom during the Exhibitor move-out process from 5:00-7:00pm on Sunday (or at 8:00am Monday). Use a 4 wheel dolly to transport your supplies from the show floor to your classroom & then return it to the Mills lobby for others to use BEFORE for you begin setting up your Classroom. Please let us know when you've finished so we can lock your classroom door to securely store your supplies overnight.

 

  • Event Team members will be taking shifts to be on site in the classrooms hallway from 8:00am till closing at 5:00pm in case you need something. If your classroom is too hot or too cold, prop open your classroom doors & find one of our Team members to tell them about it so they can notify the GCC staff.

 

  • DO NOT CALL ME EARLY IN THE MORNING. A Team Member on the morning shift can help you, so look for them in the hallway. I work the afternoon shift from 2:00pm - 5:00pm & I'd love to speak with you then, so find me in the hallway.

 

  • We must all be walking out of the GCC by 5:00pm per our contract, so pack away items as you're finished using them in order to meet this firm end time. Abuse of this end time WILL result in a $250 advance deposit for any future classroom reservations. This deposit will only be refunded if the Educator vacates the classroom before 5:00pm, otherwise it is forfeited without recourse.
A sign that says nail workshops and directions.